Inflatablee fenders

Aquascan Inflatable fenders are designed to be used by Motor Yachts, Yachts and super Yachts as well as any other vessel.

Each fender is custom made with hypalon fabric offering the maximum protection.
The choice of color is very large; the most popular among users is grey, navy blue or black.
Inflatable fenders are UV resistant the ideal fender for the marine enviromet.
The custom fenders are easily stowed and will last for years. Another advantage is that they  are easily reparable.
The fenders can be customize with the name of you vessel adding an extra elegant touch to your yacht!

The Only Quality yacht tender in USA and internationally!

 JET TENDER

Aquascan Jet Tenders are high quality rigid inflatable boats fitted with diesel engine, four stroke water jet drive and the best quality available equipment for super performance as a yacht tender.

Jet Tenders are safe, stable, and dry in rough waters, as well as in shallow waters, they can navigate in shallow waters and can take owner and guest from the yacht to the beach with ease and style!

Without any exposed rotating parts and protrusion under the keel, Jet Tenders are the safe for people in the water or on-board and can safely cruise at night.

 If maneuverability concerns you rest assure that  Jet Tenders maneuver better and faster than boats with traditional propulsion systems in closed spaces as they can use the maximum power (and, therefore, the maximum thrust) at low speed. Aquascan jet tenders are capable of turning on its own axis and to stop in a space of max 1, 5/2 times its own length.

Aquascan jets are designed to maximize internal space and seating capacity without sacrificing power and stability.   Every jet tender is a sleek performer and allows passengers to enjoy the great escape in style.

Features are light weigh with the possibility to have a hull made in carbon fiber for even lighter weight. The console is ergonomically designed to keep finger touch control close at hand. A fiber glass hull specially developed for the jet propulsion.

Every Aquascan rigid inflatable boat is hand crafted and designed to be a luxury yacht tender.

A sturdy material

HYPALON USES

Hypalon® has been used for over 40 years in many diverse synthetic rubber applications because of its broad assortment of valuable properties. Whether it is used as a protective coating for fabrics, hose and tubing in automobiles, or single ply roofing, Hypalon will effectively resist abrasion, chemicals and the weather to last longer than other materials.

Fabrics with an attractive coating of Hypalon are weather- and water resistant, rugged ...yet are lightweight and easy to handle.

All these qualities make it perfect for use on inflatable boats. Colorful coated fabrics made with Hypalon are used for hatch and boat covers, inflated structures,  and are ideal for quality boating garb, convertible tops and other consumer products.

The properties of Hypalon may be summarized as:

Colorability

Coatings of Hypalon can be brightly and permanently colored, and have excellent resistance to microbiological attack. Under actual exposure conditions (Florida exposure station), coated

fabric samples of Hypalon were weathered for more than 10 years without any noticeable

discoloration.

Superb ozone and weather resistance

Natural aging or oxidation of rubber products is accelerated out of doors by the sun’s heat and ultraviolet rays. Tests show Hypalon has a slow rate of oxidation degradation. Resistance to environmental attack

Properly compounded Hypalon® is not attacked by microorganisms and will not promote the growth of mold, mildew, fungus and bacteria. Outdoor exposure tests of coated fabrics as well

as laboratory tests, conducted according to specification MIL-F-13927-A, substantiate this resistance to microbiological attack.

Resistance to staining and soiling

Controlled soiling tests run on samples of coated fabric show that properly compounded Hypalon is highly resistant to dirt pickup, both from atmospheric deposits and from abrasive contact with soiling agents. This is because deposits that are left on the surface of Hypalon can normally be removed by soap and water. Where necessary, detergents, dry-cleaning fluids, bleaches and other cleansing agents can be used without fear of damage.

Durability

Because of their resilience and abrasion resistance, parts made of Hypalon possess good resistance to impact, crushing, cutting, gouging and other kinds of physical abuse. The broad utility of Hypalon is based in large part on its performance in the many mechanical properties that are desirable in a rubber product. Tests confirm the good resistance of Hypalon to wear and abrasion.

Oil, grease and solvent resistance

Hypalon, when properly compounded, is highly resistant to attack by hydrocarbon oils and fuels. It is also useful in contact with oils at elevated temperatures.

The New Aquascan 15

Aquascan Storm 15

Today we have test drive for the first time the new Storm 15. The Florida weather was not helping for the pictures but the excitement was in the air. 

It is always a great sens of pride and accomplishment to present a new model to the public. So here it is the new 

STORM 15

 Every detail has been well thought. Tubes are hand made in hypalon neoprene in 1300.
Notice how comfortable is the sitting position of the driver. The steering wheel has a know making the turns of the wheel a breeze.

 The floor is cover by Marine deck custom made and cut by our personal at the Fort Lauderdale plant.

The model is not in our web page yet it will be soon so if more information is require please contact Aquascan.

Inflatable boats at work

When we think about inflatable boats we usually have in mind tenders or boats for yachts to bring passenger from the main ship to shore.

Rigid hull inflatables are used in very many different ways as working boats. Even the military forces uses inflatables for rescue missions or to patrol our coasts.  

The inflatables played a very important roll when the storm Katrina destroyed the Lousiana and the golf cost region.

They provide support also for divers working to repair underwater hulls.

Aquascan is a boat manufacturing company servicing not only the Yachting community. Special attention is dedicated to working boats.

How to repair a pontoon.

Tube repair

Note: this instruction sheet is for emergency repair of small tears or punctures only. Larger tears or tears which go through a seam will require the assistance of an authorized repair station.

Repair Kit

Tools required: sandpaper, masking tape, glue (no older than 6 months), and wooden or soft plastic stick (size and shape of a ruler, but thicker), and a small paintbrush.

Conditions: the repair must be done in the shade, on a low humidity day.

 Repairs done on direct sunlight when the outside temperature is over 75 degrees Fahrenheit it will not cure correctly.

Step 1: prepare the area to be patched. Mark an area at least 2″ around the puncture or tear. Apply masking tape outside this area, as protection for the surrounding area. Take a piece of medium grade sandpaper, and sand the area to be patched. It should be sanded just enough for the surface hypalon to be rough (you should not be able to see the grain of the underlying cloth!). Check to make sure the surface is evenly sanded.

Step 2: prepare the patch. Cut a patch that exactly matches the size and shape of the marked area on the boat. Any corners on the patch should be rounded. Sand the backside of the patch so it is roughened. Check to see that it is evenly sanded.

Step 3: apply the glue. With the paintbrush, apply a thin coating of glue to the back of the patch, and to the prepared (sanded) area on the boat. Check to see that the entire surface is coated with glue. Let dry completely (about 5 to 10 minutes). Apply a second coating of glue to the patch and to the prepared area on the boat. Let dry until tacky (almost completely dry).

Step 4: apply the patch. Carefully place the patch on the boat. The two surfaces will stick together as soon as they touch, so make sure the patch is applied correctly the first time. Rub the patch with the wooden stick to remove any air bubbles. Place a hard surface under the boat fabric, and use the stick to rub the patch very hard in sweeping movements to push any air bubbles out to the edge of the patch. Rub the patch until the patch is securely fixed to the boat, and there are no loose edges.

Step 5: curing. Your patch must cure for at least 24 hours before inflating the boat or folding the tube.

Step 6: If you think that the area to be repair is too big do your self a favor and call your boat dealer because if  you mess it up the work require to clean your repair will add up to the final bill.

Floating pool

This is an inflatable pool for yacht it is build in hypalon neoprene same material we use for the inflatable boats.

The hypalon is commercial grade it has an under water enclosure to protect the swimmers.

Yacht owners use the pool in the ocean to be protected from creatures and also as a safety precaution.

The pool has a very soft floor built in hypalon neoprene; hypalon is a very strong material with high resistance 

to cuts and abrasions. it can be made in any color or color combination.

An ocean pool has to be strong but very practical too; easy to be put in the water in a jiffy and easy to be pull back on board.

You are swimming in the ocean safe in the containment of the ocean pool . Ideal for little ones and adults.
So give +Aquascan a call to have your floating pool built for you!

Custom tender Aquascan

Aquascan Runner

Aquascan Runner inflatable!

The Runner tender series is a vibrant and multifaceted series of inflatable boats.
It was created to fill a void in the market, for the customers that needed a boat that was new and exciting without weighting a ton!

Not only is it brilliant at carrying plenty of passengers from ship to shore, it can also be outfitted to be the perfect excursion tender. Designed to pull double and even triple duty, you can carry dive equipment and coolers, or tow a skier.

A popular piece of optional equipment is this faux teak flooring. Soft and forgiving on your feet, it has the classic look of teak, without the weight of real teak and without getting hot. This faux teak can sit in the sun all day and your feet will be safe from abrasions and never get hot.

The upgraded ergonomic console has every instrument at your fingertip and it is also equipped with a seat, more passengers can join in on the fun.

The exact same model, can be equipped and design to be a classy high performance boat that will take everything you can throw at her, and still come out on top.

The same high quality craftsman ship is in each boat no matter how different and customized they are. Customer service and high quality of product  is really what Aquascan is looking to give to every customer.

If you like to be part of the Aquasca family do not hesitate to call us or come for a visit when you are in

Fort Lauderdale FL. 

Aquascan RIBs rating: 9 out of 10 based on 62 ratings. 14 user reviews.

Super Yacht tenders!

The company Aquascan Inc has been in business for more than 18 years in Florida.
We specialize in manufacturing custom yacht tenders.
Only the best materials are used to create unique boats for our customers. Every detail in the construction of the boats is well studied, analyzed and tested.

For many years we have been part of the marine industry in Florida, serving not only the american market but also the international seafaring community. Over the years we have seen many of our competitors come and go, every one of them has claimed to be the best and the only one capable of creating the best boat. We are very grateful to our customers for the support we have received through the years.

Aquascan Cobra jet

So it is only appropriate to start the 2013 saying thank you to all our regular and future customers for the vote of confidence.
Thank you!

Boats from the air!

The photographer (and pilot) took off from the Florida airport early in the morning. 

 This are some pictures from our photo service done from the helicopter.

 This is the new Sprinter F 16 Supercharger. There is a lot of space in this jet tender. It is ideal to take people from the ship to shore. It also provide speed and awesome maneuverability in ruff waters. It has been  created to be a service boat that will also provide multiple opportunities for fun and enjoyment.

Notice the configuration of the seats. It seats people very comfortable even when they are tall and have long legs! The extra pad at the bow it is a a specially design front cover to protect you from wind, sun and bad weather.

The boat on the front part of the picture is a Sprinter F14 with a 110HP Yamaha jet engine. It is a tender to a Ferretti yacht. The jet is very fast and responds very well to any maneuver the driver performs. Both tenders have a very good reverse.

Every boat made by +Aquascan are done with the best materials available in the market. Each model is custom made to fit the requirements of the yacht owner and his or her style.

Inflatable boats in the USA market.

Although inflatables are very popular outside of North America the market is very stable with no growth.  This is probably the reason why many more international companies are trying to open the door into the American market, consequentially; consumers will have more and more inflatable boats to choose from.

The RIB was born around 1964 since then its use has expanded. Today Rigid Inflatable Boats are the boat type of choice for many commercial, military operators and widely used in the leisure market. The inflatable is used as all weather lifeboats in some countries.

The development of the RIB has been the most significant in the past 50 years, they have change the way of thinking for many small boat users.

RIBs have grown in size from the early 10ft to 60ft in length. From an open little boat to a RIB with cabin.

The modern RIB can undertake the most arduous seagoing task as well as having the most seaworthy hull for its size.

 When you build a normal fiberglass boat the hull and the deck are the only major components. In a good inflatable boat, after you print (construct) the hull and the deck, you have to transform a flat rubber fabric material into a nice round, smooth Seaworthy collar (very intensive artisan work).

The fiberglass hull of an Aquascan inflatable

 It is actually much easier to build a decent inflatable, than try to cheat by building a cheap one, where you have to spend more time and effort figuring out where to cut corners and the only one losing is the customer. (The main goal of this publication is not to criticize or honor a certain brand, but to EDUCATE, you the consumer).

The hypalon tubes are made from a roll of fabric

The diameter of the tubes is really not so important, of course from 12 inches to 21 inches there is a big difference, but from 19 to 20 or 21 inches not so much. Probably the tubes that are 19 inches in diameter will give more inside space. If do not intend to overload your boat, it really don’ matter.

Unless the tube has a really small diameter, there’s no way you can put the tubes under water even if the boat is full of water up to the transom.

A good sea-going characteristic of a rigid inflatable boat  is found in the way the tube and the rigid hull interact. These are Stability, Variable geometry and Fendering.

Cobra Diesel 16

Sprinter F 16 Hooters Patrol